300W Pulse Laser Cleaning Machine For Wood Metal Paint Rust Removal Aluminum Oxidation Water Cooling
300W Pulse Laser Cleaning Machine For Wood Metal Paint Rust Removal Aluminum Oxidation Water Cooling
Clearance
Product Overview
Pulsed laser cleaning is one of the most precise laser cleaning methods available and is designed to minimize impact on the base material surface.
Because pulsed laser cleaning delivers energy in extremely short bursts, heat transfer into the substrate is reduced during operation. This makes it suitable for applications including:
- Removal of stains, rust, and paint from wood surfaces
- Removal of coatings from thin metal sheets
- Cleaning of precision components such as molds, gears, and machined parts
- Removal of oxide layers from aluminum surfaces
Different pulsed laser systems may vary significantly, even at the same rated power. Pulse width, single-pulse energy, operating frequency, optical design, system calibration, and service support all influence actual cleaning performance.
Machines with similar appearance or accessories may not deliver equivalent cleaning results.
Videos shown on this product page are demonstrations of this specific machine only and should not be considered performance references for other products with similar appearance, accessories, or laser power.
All demonstration videos were produced by our team and are intended to represent typical performance of this machine under comparable operating conditions.
Dimensions
| Item | Specification |
|---|---|
| Dimensions (W x D x H) | 22.0 x 33.5 x 35.5 in |
| Machine Weight | 80 kg |
Technical Specifications
| Item | Specification |
|---|---|
| Laser Source | 1060 to 1080 nm Pulsed Fiber Laser |
| Laser Output Power | 300 W |
| Laser Peak Power | 60 kW or higher |
| Frequency Adjustment Range | 1 to 1000 kHz |
| Pulse Width | 10 to 500 ns |
| Power Consumption | Less than 3.5 kW |
| Cable Length (Base to Head) | 5 m |
| Cooling System | Water Cooling |
| Cleaning Head | 1.6 lb Handheld Wobble Head |
| Storage Temperature | 5 to 131 F (-15 to 55 C) |
| Operating Temperature | 50 to 99 F (10 to 38 C) |
| Operating Humidity | 5 to 85 percent (Non-Condensing) |
| Coolant | Pure Water or Approved Anti-Freeze Coolant |
| Maximum Working Pressure | 1 MPa or less |
| Electrical Requirements | 220V AC, 50/60Hz, plus or minus 10 percent |
Safety Notice
Class 4 Laser Device
Operation of this equipment requires appropriate laser safety procedures and protective measures.
Customers are responsible for complying with ANSI Z136.1 laser safety standards and all applicable local regulations.
Professional training and appropriate personal protective equipment (PPE) are strongly recommended.
Included Accessories
- Protective Lens x 10
- Laser Safety Glasses x 1
Wood Varnish and Coating Removal Capability
This pulsed laser cleaning machine can be used to remove varnish and surface finishes from wood and offers a high-precision alternative to sanding for certain applications.
The laser emits nanosecond pulses that are primarily absorbed by the coating layer, helping remove:
- Paint
- Varnish
- Lacquer
- Rust
- Oil and surface contamination
Because the pulses are extremely short, heat transfer into the wood is reduced compared with continuous thermal processes.
This technology is especially suitable for:
- Furniture restoration
- Antique wood cleaning
- Detailed decorative surfaces
- Thin coating removal
Typical Coating Removal Difficulty
| Coating Type | Removal Difficulty |
|---|---|
| Shellac | Easy |
| Lacquer | Easy |
| Thin Varnish | Good |
| Polyurethane | Slower |
| Thick Epoxy | Difficult |
For wood applications, parameter selection is critical.
Recommended Starting Settings
- Power: 40 to 120 W
- Frequency: 60 to 120 kHz
- Fast scanning speed
- Wide scan pattern
Excessive power, slow scanning, or prolonged dwell time may discolor, char, or damage wood surfaces.
For large flat areas such as floors, doors, and broad panels, conventional sanding may still be faster. Pulsed laser cleaning excels in restoration work, precision cleaning, and intricate details.
Couldn't load pickup availability
Low stock: 2 left
